This version of this document is no longer maintained. For the latest documentation, see http://www.qnx.com/developers/docs.

`devn-ppc800-ads.so`

Driver for PPC800 ADS eval board Ethernet adapters and compatibles

Syntax:

io-net -d ppc800-ads [option[,option ...]] ...

Use commas (,) to separate the options (not spaces).

channel=1|2|3|4: The SCC channel. The default is 1.
mac=XXXXXXXXXXXX: MAC address of the controller.
mtu=X: Maximum transmission unit. The default is automatically detected on supported hardware.
nomulticast: Disables the driver from sending or receiving multicast packets. By default, multicast is enabled.
promiscuous: Enable promiscuous mode. The default is off.
receive=num: Set the number of receive descriptors. The default is 30.
transmit=num: Set the number of transmit descriptors. The default is 15.
verbose verbose=num: Be verbose. Specify num for more verbosity (num can be 1-4, the higher the number, the more detailed the output). The output goes to slogger, invoke sloginfo to view.

The devn-ppc800-ads.so driver controls PPC800 ADS eval board compatible Ethernet adapters.

Start io-net using the PPC800 ADS driver and the full TCP/IP stack:

io-net -d ppc800-ads mac=000102C18C40 -p tcpip

/dev/io-net: The directory where, by default, drivers and protocol modules add entries. For more information, the documentation for io-net.