This version of this document is no longer maintained. For the latest documentation, see http://www.qnx.com/developers/docs.

`devn-klsi.so`

Driver for Kawasaki-based USB Ethernet adapters

Syntax:

io-net -d klsi [option[,option ...]] ...

Options:

Use commas (,) to separate the options (not spaces).

connector=0|1|2|3

Network cable connector type.

0: BNC
1: UTP
2: AUI
3: FIBER

iftype=num

Interface type (from <net/if_types.h>). The default is IFT_ETHER.

iorange=0xXXXXXXXX

The IO base address.

lan=num

The LAN number.

mac=XXXXXXXXXXXX

The MAC address of the controller.

media=num

Media type (from <hw/nicinfo.h>). The default is NIC_MEDIA_802_3

mru=num

Maximum receive unit. The default is 1514.

mtu=num

Maximum transmission unit. The default is 1514.

nomulticast

Disable multicast support.

path

Set the device name. The default is /dev/usbenet0.

priority=N

Priority of the driver event thread. The default is 21.

promiscuous

Enable promiscuous mode.

uptype=name

Interface name. The default is "en".

verbose verbose=N

Be verbose. Specify num for more verbosity (num can be 1-4, the higher the number, the more detailed the output). The default is 0. The output goes to slogger, invoke sloginfo to view.

wait=sec

Wait sec seconds for the USB stack. The default wait time is 60 seconds.

Description:

The devn-klsi.so driver controls Kawasaki-based USB Ethernet adapters.

Examples:

Start io-net using the Kawasaki LSI Ethernet adapter driver and the full TCP/IP stack:

io-net -dklsi -p tcpip
ifconfig en0 10.184

Files:

/dev/io-net: The directory where, by default, drivers and protocol modules add entries. For more information, the documentation for io-net.

Caveats:

Start the USB stack before using this driver (see devu-ohci.so or devu-uhci.so).